WLAN基础配置之AP上线

配置WLAN无线网络的第一阶段，AP上线技术：

实验目标：使得AP能够获得来自AC的DHCP地址服务的地址，且是该网段地址池中的IP。

实验步骤：

1.把AC当作三层交换机配置虚拟网关

sys

Enter system view, return user view with Ctrl+Z.

[AC6605]undo in e

Info: Information center is disabled.

[AC6605]vlan 100

Info: This operation may take a few seconds. Please wait for a moment…done.

[AC6605-vlan100]int vlan 100

[AC6605-Vlanif100]ip add 172.16.100.1 24

[AC6605-Vlanif100]int g0/0/1

[AC6605-GigabitEthernet0/0/1]p l a

[AC6605-GigabitEthernet0/0/1]p d v 100

[AC6605-GigabitEthernet0/0/1]

2.配置核心交换机S-CORE

[S-CORE]vlan 100

[S-CORE-vlan100]q

[S-CORE]int g0/0/5 把与AC相连的接口加入互联vlan100

[S-CORE-GigabitEthernet0/0/5]p l a

[S-CORE-GigabitEthernet0/0/5]p d v 100

[S-CORE-GigabitEthernet0/0/5]q

[S-CORE]int g0/0/1 与下联链路配置trunk并放行VLAN10 VLAN 100的流量

[S-CORE-GigabitEthernet0/0/1]p l t

[S-CORE-GigabitEthernet0/0/1]p t a v 10 100

3.配置接入层交换机

[S]vlan b 10 100

Info: This operation may take a few seconds. Please wait for a moment…done.

[S]int e0/0/1

[S-Ethernet0/0/1]p l a

[S-Ethernet0/0/1]p d v 10

[S-Ethernet0/0/1]int e0/0/2

[S-Ethernet0/0/2]p l a

[S-Ethernet0/0/2]p d v 10

[S-Ethernet0/0/2]int e0/0/4

[S-Ethernet0/0/4]p l a

[S-Ethernet0/0/4]p d v 100

[S-Ethernet0/0/4]q

[S]dis vlan

[S]int e0/0/3

[S-Ethernet0/0/3]p l t

[S-Ethernet0/0/3]p t a v 10 100

[S-Ethernet0/0/3]

4. 在AC上配置DHCP服务

[AC6605]dhcp en

Info: The operation may take a few seconds. Please wait for a moment.done.

[AC6605]int vlan 100

[AC6605-Vlanif100]dhcp se

[AC6605-Vlanif100]dhcp select in

[AC6605-Vlanif100]dhcp select interface

[AC6605-Vlanif100]

5.在AP上查看是否获得了AC上的DHCP地址